Mechanical Equipment

Mechanical Equipment

Mechanical Equipment

Mechanical Equipment

The mechanical safety of a given consumer product is a major concern and protection of people, animals and property from damage is gaining prominence throughout the world, especially in the growing European market. For manufacturers that want to sell their machinery within the European Union (EU), the CE marking is applied to indicate that their products have passed the required tests according to their type and nature of use. In order to get the CE mark, a company may have to spend considerable time, labor, financial resources and energy to understand the rules that make its products meet the basic health and safety requirements set out in the Machinery Code.

For EU Machinery Directives and Low Voltage Directives, prospective certification testing organizations have experts who guide you through this process more effectively. Examine with your customers to provide detailed mechanical instruction requirements and to get you informed on how to apply them to your product. Next, we will test whether your product meets the basic health and safety essentials in the directive. Once completed, your technical structure files will be edited if your product meets the basic requirements and the CE mark is also applicable. With experts in the identification and support of experts, there will be a guarantee to enter the market.

Specifically, what is the EUMachinery Directive? By definition, the Machinery Directive (2006/42 / EC) applies to machines, moving machinery, machinery, machines used to lift and transport people, and safety accessories. The Essential Health and Safety Requirements (EHSR) set forth in the regulations cover the entire area of mechanical engineering as being of crucial importance to industrial society.

Machinery regulations apply to the following products:

* Ring connected components

* At least one moving part

* Regulator, control and main circuit

* Materials processing operations, handling, handling and packaging

* Several mechanical joint operation

* Interchangeable equipment

* Low-voltage directive does not involve the hazards

* Other instructions are not covered

The Machinery Directive states that certification bodies must carry out CE type tests for machinery products and safety components that are subject to Annex IV. This directory defines and includes all the types of all products related to this directive:


* Circular saw, sawing machine

* For manual feeding woodworking surface planer

* Unilateral trimming machine for the plane

* Band saw

* Modular woodworking machine

* Manual tenoner

* Manual vertical axis casting machine

* Will be combined chain saw

* Press bed, including the metal cold-working pressure off

* For plastic and rubber molding machine

* Machines for underground work: machines for use on rails, hydraulically powered lifts, internal combustion engines

* Household garbage hand loader with compression mechanism

* Protective equipment and separable drive shaft with universal joint

* Car lifting equipment

* Used to lift people's equipment with a risk of falling over 3 meters

* Machines used to make pyrotechnics

Safety parts:

* Inductors (non-contact sensor protection, shielding, electromagnetic probe, grating, etc.)

* Two-hand / double control operating device

* Automatic removable screen

*  Anti-roll protection device

* Anti-object fall protection device

CE certification product safety labeling main steps:

(1) The design of the product conforms to the relevant product safety standards

(2) The establishment of a technical document (TCF) (ie the specific information presented to confirm that the product has met the basic safety requirements of the relevant directives for CE certification)

(3) The implementation of quality assurance system

(4) Verified by the accredited certification body or signed self-declaration Declaration of conformity (Certain products must be approved by the accredited certification body before attaching the CE certification mark)

(5) attached to the CE certification mark

The company's industrial machinery CE certification services:

1, Explain the standards of relevant product safety instructions, evaluate the applicable product safety instructions and standards, and explain the requirements of relevant product safety instructions and standards.

2. The product safety standards check and corrective suggestions are based on the basic health and safety requirements of the relevant directives (mechanical directives, etc.) and the actual product safety standards check, the products of your company and the proposed amendments, and the result writing review report;

3, Product risk assessment and countermeasures report, according to EN1050 to write product risk assessment and countermeasures report;

4, To help identify and edit the product-related technical information: mechanical full chart, specification sheet, mechanical structure, safety device diagrams, circuit diagrams and electrical components table, oil / air pressure chart and oil / air pressure components table,

5, The implementation of the relevant test at the factory site: mechanical safety structural inspection, electrical safety testing, noise testing and other projects;

6, Confirm the verification samples, counseling vendors in accordance with the standards required to prepare verification samples, and verify the compliance of the verification sample.

7, CE safety technical file (TCF) editing and writing, including: description of product features and characteristics, the difference between series of product description, quality assurance system description, CE declaration of conformity, the applicable instructions and standards, basic mechanical instructions Compliance check report with safety requirements, product risk assessment and response report, conformity check report of related product safety standards, test report of relevant safety standards and noise test report;

8, To help establish the correct, complete CE declaration of conformity;

9, Confirm the lack of verification personnel and confirm the direction of product correction;

10, Confirm the product correction status;

11, The product passed the certification and obtain a certificate;

12, Other services (optional): technical drawing drawing, warning signs making, technical drawings translation services, manual preparation, operation and maintenance manual preparation, manual preparation of translation services, operation and maintenance manual preparation of translation services, translation of the relevant English standard English Translation).